2024年优质的马钢冷轧总厂新建6#热镀锌机组-退火炉设备变更公告-中标公示网-中标网

【上海,宝山区】马钢冷轧总厂新建6#热镀锌机组-退火炉设备变更公告

发布时间：2024-04-03

标签：变更上海马钢冷轧总厂新建6#热镀锌机组-退火炉设备变更公告宝钢工程技术集团有限公司（买方）招标信息招标采购

发布时间	2024-04-03	截止日期	立即查看
联系人	立即查看	联系电话	立即查看
项目地址	立即查看	项目名称	立即查看
网址	立即查看	填报单位	立即查看
更正内容	立即查看	设备词	立即查看

下文中****为隐藏内容，仅对中项网会员用户开放，【注册 / 登录】后可查看内容详情

招投标详情

马钢冷轧总厂新建6#热镀锌机组-退火炉设备变更公告变更说明投标文件递交截止时间***：******月***日***时***分，变更为：******月***日***时***分。发布日期：******月***日招标编号***-708 招标编号*****（以下称招标机构）***（以下称买方）委托，就其马钢冷轧总厂新建6#热镀锌机组-退火炉设备所需的下列货物进行公开招标，邀请合格投标人进行网上电子投标。标段编号***-708/01 标段名称：马钢冷轧总厂新建6#热镀锌机组-退火炉设备 1．招标货物名称、数量、技术规格和资金招标货物名称：退火炉设备数量：1批技术规格：（1）退火炉机械设备 1)最大工艺段速度：GI按180m/min设计,Al-Si 按150m/min设计。 2)退火炉最大加热能力按2.5mm*70m/min，退火炉温度780℃设计。 3)产能计算时不考虑汽车外板，但退火炉具备汽车外板生产能力。 4)快冷段需满足DP780/980/1180***路径2所需的冷却速率，采用喷气冷却，氢气浓度由投标方确定。 5)快冷后TDS段配置炉内冷却器，用于DP780/980/1180***路径1，将带钢从快冷出口520℃冷却至460℃，快冷出口至TDS冷却器前带钢保温时间≥8s。 6)DP780~DP1180产能计算时，按***路径1考虑。退火炉内配置感应加热器，用于DP780/980/1180***路径2的生产。感应加热器功率4300kW，并提供***路径2生产时的规格速度表，感应加热器耐温等级需按铝硅产品设计。 7)辐射管加热段设置独立的氧化腔室，氧化腔室内具备加氧和增湿两种功能。设计需保证氧化腔室内气氛良好的均匀性及与其他炉体之间的密封性。 8)辐射管加热段及均热段各腔室设置独立的加湿器及露点检测探头，实现露点自动控制功能。 9)带钢均热温度控制精度必须达到目标温度±5℃，带钢冷却温度控制精度必须达到目标温度±5℃。 10)对于所有钢种的冷却速度必须做到连续可调。 11)退火炉应采用先进、成熟、可靠、符合环保要求的工艺技术和设备。在保证产品大纲规定的前提下，其产品质量、能源介质消耗及辅助材料消耗等技术经济指标要达到国际先进企业标准。 12)退火炉设备由预热段、辐射管加热段（含氧化腔）、均热段、缓冷段、快冷段、热张紧辊室、炉鼻子组成。（2）电气仪表自动化和工业电视设备 1）传动采用全数字式矢量控制和V／F控制、AC恒速控制的交流调速方式。 2）自动化系统，采用高速可靠的网络系统，开放式的人机界面系统（HMI）。 3）采用先进的、可靠的电加热设备。 4）配置事故电源。 5）常规控制要求配置有温度、压力、流量、液位和电导率等仪表。 6）检测要求配有雷达式CPC、张力检测仪、辐射高温计、扫描式高温计、火焰监视控制系统和氧、氢、露点、CO检测等仪表。 7）炉子通过PLC控制系统实现自动控制。 8）采用数学模型控制。 9）所提供的硬件、系统软件、中间软件、应用软件应成熟可靠，并提供正版授权。 10）在退火炉必要位置***，信号在操作室内相应的监视器上显示，监视器不属于投标人的供货范围。 11）退火炉PLC与BCU之间的通信，要求采用Profinet通讯协议。（3）其他技术参数详见招标文件（技术部分）。资金现汇项目 2. 交货地点***：交货地点：关境外设备： CIF上海港；关境内设备：马钢股份冷轧总厂项目现场交货时间：境外设备:最终一批设备从合同生效起 16个月交货完成(分批交货)(FOB装运港）;关境内设备:最终一批设备从合同生效起 16个月交货完成(分批交货)(DDP 货到现场) 3. *凡确认投标的投标人请登录宝华智慧招标共享平台，务必在开标前注册为其会员并通过年检以获得投标资格，中标情况将在宝华智慧招标共享平台公示。宝华智慧招标共享平台(http***idding.com)和中国招标投标公共服务平台(http***pubservice.com/)***的招标项目信息（邀请招标除外），有兴趣的投标人可以登录查看。登录后，投标人可在宝华智慧招标共享平台上购买招标文件***。 4. 购买招标文件***：******月***日起到******月***日止。 5. 招标文件***：招标文件***（电子版），若中文和英文版有冲突以中文版为准。 2,0***元人民币或33***元整。招标文件***，投标人成功购标后，自行下载招标文件***。招标文件***。 6. 投标截止时间***：******月***日***时***分（北京时间）。投标人应于投标截止时间***投标文件。 7. 开标方式：一步法。 8. 开标地点：宝华智慧招标共享平台电子开标大厅。 9. *对投标人的资格要求：（1）未被国家企业信用信息公示系统(www***)列入严重违法失信企业名单；（2）未被“信用中国”网站(www***)列入失信被执行人名单；（3）由于项目复杂，技术要求高，任何投标人希望参与本项目的，均应在开标前与招标人联系开展技术交流并签订技术协议，未能签订技术协议的投标人，其投标将被否决。技术协议现场签订联系人：***（***469）。若签订的技术协议与招标文件***，以招标文件***。（4）本项目不接受代理商投标。 10. 本项目接受联合体投标。 11.招标人相关信息：招标人联系人：*** 招标人邮箱：gaoyy@baosteel.com 招标人电话：***827 12. 未领购招标文件***。 13. 客服热线：***60 （有关投标人CA办理事项的咨询）传真：*** 网上购标方法：具体操作方法详见宝华招标网“操作指南”。项目经理：唐王忆（有关商务、技术问题或招标文件***。）电话：*** 电子邮件：keepitreal@baosteel.com 业务咨询：招标机构***：***市***区***路550弄***楼购标时人民币付款采用第三方支付，外币付款可以汇款到相应外币账户内开户银行（外币）：建行宝钢宝山支行收款人：*** 账***元：*** Swift Code：PCBCCNBJSHX Maanshan Iron & Steel Company Limited New 6# CGL Project Annealing Furnace Equipment Change the description Deadline for bid submission and Bid Opening Time has been changed from 09:00 on April 24, 2024 to 09:00 on April 25, 2024. Issue Date：2024-04-03 Tendering No：0721-2440A007-B07-708 Tendering No. (China International Bidding Website) No：***B0708 Shanghai Baohua International Tendering Co., Ltd.(Hereinafter referred to as Tendering Agency) is commissioned by Baosteel Engineering & Technology Group Co., Ltd.(Hereinafter referred to as tenderer) on Open Tendering for the following goods required in Maanshan Iron & Steel Company Limited New 6# CGL Project Annealing Furnace Equipmentinvites eligible bidders to online e-bidding. Bid section No：0721-2440A007-B07-708/01 Bid section Name：Maanshan Iron & Steel Company Limited New 6# CGL Project Annealing Furnace Equipment 1． The name, quantity, technical specifications and fund sources of goods for tendering： The name：Annealing Furnace Equipment Quantity：1 batch Technical specifications：（1）Mechanical equipment 1)The max process speed: GI:180m/min, Al-Si:150m/min. 2)The maximum heating capacity of the annealing furnace is designed to be 2.5mm * 70m/min at 780 ℃. 3)When calculating production capacity, the outer panel sheet is not considered, but the annealing furnace has the capacity to produce outer panels sheet. 4)The rapid cooling section needs to meet the cooling rate required for process path 2 of DP780/980/1180.The hydrogen concentration is determined by the seller. 5)After rapid cooling, the Exit section is equipped with an gas cooler for DP780/980/1180 process path 1, which cools the strip from 520℃ to 460℃. The holding time of the strip from the rapid cooling outlet to the TDS gas cooler is ≥8 seconds. 6)When calculating the production capacity of DP780~DP1180, it should be considered according to process path 1. The annealing furnace is equipped with an induction heater for the production of DP780/980/1180 process path 2. The power of the induction heater is 4300kW, the bidder supply the production table of DP780/980/1180 process path 2, and the temperature resistance level of the induction heater needs to be designed according to the aluminum-silicon product. 7)An independent oxidation chamber is equipped in the heating section , the oxidation chamber has two functions: oxygenation and humidification. The design needs to ensure good uniformity of the atmosphere in the oxidation chamber and good tightness form other chambers. 8)Each chamber of the heating section and soaking section is equipped with an independent humidifier and independent dew point detector to realize the automatic control function of dew point. 9)The soaking temperature control accuracy of strip steel must reach the target temperature ±5°C, and the cooling temperature control accuracy of strip steel must reach the target temperature ±5°C. 10)The cooling rate must be continuously adjustable for all steel grades. 11)The process technology and equipment adopted in the annealing furnace and alloying furnace should be advanced, mature, reliable and meet the environmental protection requirement. (Note: can produce GI and Al-Si products). Under the premise that the product program can be ensured, the technical and economic indicators such as quality of products, consumption of energy media and auxiliary material should reach the advanced level of the lead company"s criterion in the world. 12)The annealing furnace equipment is composed of a preheating section, a radiant tube heating section (including an oxidation chamber), a soaking section, a slow cooling section, a rapid cooling section, Exit section and a furnace snout. （2）Electrical, instrument, computer and ITV of annealing furnace 1)The electrical drives adopts full digital vector control, V/F control and AC constant speed control. 2)The three-electric integrated automation system adopts a high-speed and reliable network system and an open human-machine interface system (HMI). 3)Adopt advanced and reliable electric heating equipment. 4)Configure the accident power supply. 5)Conventional control requires instruments for temperature, pressure, flow, level, and conductivity. 6)The detection requirements are equipped with radar CPC, tension detector, pyrometer, scanning pyrometer, flame monitoring and control system, oxygen, hydrogen, dew point, CO detection and other instruments. 7)The furnace control is automatically controlled by the PLC control system 8)Furnace mathematical model should be supplied 9)The hardware, system software, intermediate software, and application software provided should be mature and reliable.And genuine authorization should be provided. 10)The industrial high-temperature camera device is equipped in the necessary position of the annealing furnace, and the signal is displayed on the corresponding monitor in the operation room, the monitor does not belong to the the bidder’s scope of supply. 11)The communication between the annealing furnace PLC and the BCU requires the Profinet communication protocol. (3)Other technical parameters are detailed in the technical section of the bidding documents. Fund sources of goods：Cash items 2. Delivery time and place： Delivery place：Offshore equipment: CIF Shanghai Port；Equipment in customs：Masteel Project site Delivery time：Offshore equipment：The final batch of equipment shall be delivered within 16 months from the effective date of the contract（delivery by installment）(FOB Port of Shipment)；Equipment in customs：The final batch of equipment shall be delivered within 16 months from the effective date of the contract（delivery by installment） (DDP goods to the site) 3. *The bidders who have confirmed to participate the bid must log on China International Bidding Website (http***ding.com), and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website. Baohua E-bidding website (http***dding.com) and China Tendeing & Bidding Public Service Platform (http***pubservice.com) could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online. 4. Time for purchasing Tendering documents: Starting from：2024-04-04 to 2024-04-12 (Beijing time). 5. Sales prices of the tendering document: One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language.Sales price is 2,000.00CNYor330.00USD All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable.***(Beijing time). 7. Bid opening method ：One-step of opening。 8. E-bid opening place：Bid opening hall on Baohua Intelligent Bidding Integrated Platform。 9. *Requirements of Bidder’s qualification：（1）Not included in the list of seriously illegal and dishonest enterprises by the National Enterprise Credit Information Publicity System (www***); （2）Not included in the list of persons subject to enforcement for trust-breaking on the website of Credit China (www***); （3）Given the complexity and high technical requirements of the project, any bidder wishing to participate in the project shall have technical exchange meetings and sign technical agreements with the Tenderee before bid opening. If the bidder fails to sign a technical agreement, its bid will be rejected. If there is any difference between a signed technical agreement and bidding document, bidding document shall prevail. (Contact person of Baosteel Engineering Technology Group Co., Ltd.: Luo Hongliang ***469）；（4）This project does not accept agent bids. 10. This project no consortium bidding is accepted 11.Information about the tenderer： Tenderer contact：高经理 Tenderer"s mailbox：gaoyy@baosteel.com Tenderer telephone：***827 12. Tel：***60 (consulting for bidders CA affairs) Fax：*** Online tendering document purchase: please refer to "HELP" for details on Baohua tendering website. Bid manager：Tang wangyi (contact project leader for commercial, technical problems of tendering project, or objections to tendering documents) Tel：*** E-mail：keepitreal@baosteel.com Business assistant： Tel： Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account. Bank account（Foreign currency）：China Construction Bank, Baoshan Baosteel Branch Beneficiary：Shanghai Baohua International Tendering Co., Ltd. Account Number: USD：*** Swift Code： PCBCCNBJSHX

立即登录还不是会员？立即免费注册

24小时咨询热线: 400-816-1360