中化能源泉州石化26万吨/年丙烯腈项目废酸再生装置再生炉衬里采购国际招标项目公告

日期：2023年9月18日

招标编号***e="16px;line-height:150%;font-family:"Arial",sans-serif">0747-2340SCCZX475

1.***（招标代理机构）***（招标人）委托，以国际招标方式邀请潜在投标人就下列货物和有关服务提交密封投标：

1、设计范围

1.1 耐火衬里的设计；

1.2 外保温及防护层的设计；

1.3 设计文件需要提交给设计单位***。

2、供货范围

2.1 耐火衬里（包括但不限于耐火砖、保温砖、陶瓷套管、浇注料、耐火泥浆、陶瓷纤维纸、陶瓷纤维毯）；

2.2 外保温隔热层；

2.3 锚固钉及内部支撑件（提交给再生炉制造厂家）；

2.4 所有衬里材料按照满足整炉需要提供，业主不留剩余耐火砖。

3、现场施工范围

3.1 材料的包装、运输、检试验、砌筑、验收、试车以及技术服务；

3.2 内部原则上不要求除锈，如需要，可进行局部处理（工作量较小）；

3.3 内部脚手架搭拆（执行SH/T3555-2014规定，并符合《***脚手架作业管理办法》中的要求）；

3.4 耐火衬里施工；

3.5 耐火材料报验送检；

3.6 负责将材料运至施工现场指定的位置；

3.7 负责半成品及成品质量的保护工作；

3.8 负责为了完成衬里施工所必须的临时设施、防护棚，按照业主管理规定的安全、质量投入；

3.9 负责现场施工所需的临时水电接入工作，并按照业主管理规定进行计量和交费（业主负责提供临时水电的接入点，位置***区红线100米以内；水电的费用由施工的单位***）。

4、业主工作范围

4.1 外保温防护层及捆扎钢带、钢带扣的供货

4.2 外保温隔热层及防护层的施工

4.3 烘炉（厂家提供烘炉方案并进行技术指导）

5、合同执行职责

5.1现场施工由项目部负责管理

5.2设计由设计管理部管理

5.3物资制造及供货由物装中心管理

以上相关工作范围与询价***之处以本招标方案的要求为准。

详见招标文件***《货物需求一览表及技术规格》。

2.***得到进一步的信息和查阅招标文件。

*3. 对投标人的资质业绩要求：

1)投标人具有有效的营业执照（国内投标人）/企业经营许可证明文件（国外投标人）。

2)投标人应当提供在开标日前3个月内由其开立基本账户的银行开具的银行资信证明的原件或复印件。

3)投标人在投标前需在中国国际招标网（以下简称“招标网”，网址：http***dding.com）成功注册。

4)信誉要求：

① 2020年1月1日至今，境内投标人在国家企业信用信息公示系统中未被列入严重违法失信企业名单或列入经营异常名录信息，在“信用中国”网站（www***）或各级信用信息共享平台中未列入失信被执行人名单。

证明材料：投标人需提供“信用中国”（www***）和“国家企业信用信息公示平台”（http***.cn），截图加盖投标人公章并附在投标文件中。

② 2020年1月1日至今，境外投标人在中国境内近三年没有不良业绩记录或严重质量问题，否则其投标也将被否决。

证明材料：投标人须提供承诺函加盖投标人公章。

③投标人未被列入中国中化供应商黑名单库（名单以投标截止时间***）；

5)本项目只接受制造商/生厂商投标；

证明材料（装订在投标文件中）：投标人需提供制造商资格声明加盖投标人公章并装订在投标文件中。

6)财务和经营状况要求：投标人没有处于破产、资产冻结、财产被接管、被责令停业、投标资格被取消等状态，且在 2018 年以来财务状况良好，具有足够资产及能力来有效地履行合同；

证明材料：投标人须提供承诺函加盖投标人公章并装订在投标文件中。

7)业绩要求：

2018年1月1日至今（以合同签订时间为准），投标人在中国境内具有新建丙烯腈联合装置SAR废酸再生炉耐火材料成套供货业绩。

证明材料：投标人须提供相应业绩的合同、技术协议等，其内容至少应包括项目名称、用户名称、装置规模、供货的耐火材料品种及规格和参数等、供货数量、合同签订日期以及签署和盖章页、用户联系人和电话等。

8)本项目不接受联合体投标。

招标人***保留审查原件的权利，如发现以上资质证书、业绩及相关资料造假的，作否决投标处理。

4.有兴趣的潜在投标人可于2023年9月18日至2023年9月25日每天（节假日除外）8:30至17:00时（北京时间）在下列地点***，平台使用及技术支持费为2000300地点：中化商务电子招投标平台

联系人：中化商务电子招投标平台

电话：86+10-***

网上报名及下载招标文件：登录中化商务电子招投标平台（e.sinochemitc.com），潜在投标人需先进行网上注册（免费），通过网上支付平台使用及技术支持费，支付成功后，可下载招标文件***。

在获取招标文件后，投标人需登陆中化能源采购供应链SCM平台（http***m.com）进行注册（免费），并上传标书获取凭证（发票），审核完毕后，需在SCM平台点击标书下载才能进行后续流转，SCM平台技术支持电话：400-818-8227 转 2。

特别注意：

①投标文件（纸质文件+电子文件）须按招标文件***，否则不予接收。

②投标人需在SCM系统中录入本项目的报价***截止时间***应链SCM平台（http***m.com）,全流程完成的标志为供应商获得“投标回执”。

③当电子版文件与纸质文件不一致时，以纸质文件为准。

业务联系

地址：***市***区***路24号院平安幸福中心B座25层，邮编：100073

联系人：***、邱少尉、常刚、陈志超

电话：+86 ***524，+86 ***906

电子邮件：chenxiaomei02@sinochem.com , qiushaowei@sinochem.com

5.所有投标文件应于2023年10月9日9:30时（北京时间）之前递交到以下地点，开标仪式定于2023年10月9日9:30时举行。届时请无法现场参与开标仪式的投标人代表出席线上开标仪式。线上开标仪式将以腾讯会议形式进行，请提前下载腾讯会议软件（免费）。会议ID和会议密码将在开标前3日以邮件形式告知投标人。

投标文件递交地点***：***市***区***路24号院平安幸福中心B座23层会议室（线上同步）。

投标文件递交方式：投标人采用送达或邮寄，两种方式均应保证在投标文件递交截止时间******。邮寄地址：***市***区***路24号院平安幸福中心B座25层陈晓梅收 ***524。

6.外币支付平台使用及技术服务费的账号：

户名：***

开户行：***北京丰台支行

***5282

***7855

SWIFT Code：BKCH CN BJ 110

请投标人在电汇平台使用及技术支持费时，在汇款附言里依次注明：①招标编号***style="16px;font-family:"Arial",sans-serif">“X475”；②平台使用及技术支持费；③投标人名称。

Date: Sep.,18th, 2023

Bid No.:0747-2340SCCZX475

1.Entrusted by Sinochem Energy High-Tech Co., LTD Shanghai Branch (Tenderee), Sinochem Commerce Co., Ltd. (Tendering Agent) invites sealed bids from eligible potential bidders in terms of following goods and associated service in the manner of international competitive bidding.

1. Design scope

1.1 Design of refractory lining;

1.2 Design of external thermal insulation and protective layer;

1.3 The design documents shall be submitted to the design unit and the process package licensor for confirmation.

2. Scope of supply

2.1 Refractory lining (including but not limited to refractory brick, insulating brick, ceramic sleeve, castable, refractory mortar, ceramic fiber paper and ceramic fiber blanket);

2.2 External thermal insulation layer;

2.3 Anchor nails and internal supports (to be submitted to the regenerator manufacturer);

2.4 All lining materials shall be provided to meet the needs of the whole furnace, and the Owner shall not leave any remaining refractory bricks.

3. Site construction scope

3.1 Packaging, transportation, inspection and test, masonry, acceptance, commissioning and technical services of materials;

3.2 Internal derusting is not required in principle. If necessary, local treatment can be carried out (the workload is small);

3.3 Erection and removal of internal scaffolds (in accordance with SH/T3555-2014 and the Scaffold Operation Management Measures of Sinochem Quanzhou Petrochemical Co., Ltd.);

3.4 Refractory lining construction;

3.5 Application for inspection of refractory materials;

3.6 Be responsible for transporting the materials to the designated location on the construction site;

3.7 Be responsible for the quality protection of semi-finished products and finished products;

3.8 Be responsible for the safety and quality input of temporary facilities and protective sheds necessary for the completion of lining construction in accordance with the management regulations of the Owner;

3.9 Be responsible for the connection of temporary water and electricity required for site construction, and measure and pay according to the management regulations of the Owner (the Owner is responsible for providing the connection point of temporary water and electricity, which is located within 100 meters of the red line of the battery limit; the cost of water and electricity shall be borne by the construction unit).

4. Scope of work of the Owner

4.1 Supply of external thermal insulation protective layer, binding steel belt and steel belt buckle

4.2 Construction of external thermal insulation layer and protective layer

4.3 Oven drying (the manufacturer shall provide the oven drying scheme and technical guidance)

5. Contract execution responsibilities

5.1 Site construction shall be managed by the Project Department.

5.2 Design shall be managed by the Design Management Department.

5.3 Material manufacturing and supply shall be managed by the Material Loading Center.

In case of any inconsistency between the above scope of work and the inquiry documents, the requirements of this bidding scheme shall prevail.

(Details shall be found in Section 8 Schedule of Requirements and Technical Specifications.)

2.Interested Potential bidders may obtain further information and refer to Bidding

Documents from Sinochem Commerce Co., Ltd.

*3. Qualification and Performance requirements to the bidders:

1) The bidder must have a valid business license or business license certificate.

2) The bidder shall provide the original or photocopy of the bank credit certificate issued by the bank where the account is opened within 3 months before the bid opening date.

3) The bidders shall successfully register on China International Tendering Website (hereinafter referred to as "bidding.com", website: http***dding.com) before bidding.

4）Credibility requirements:

① From January 1, 2020 to the present, the domestic bidders have not been listed in the national enterprise credit information public display system or in the business exception list, and have not been listed in the "Credit China" website (www***) or credit information sharing platform at all levels. The list of executed persons in breach of trust.

Supporting materials: Bidders should provide "Credit China" (www***) and "National Enterprise Credit Information Public Platform" (http***.cn). The screenshot should be stamped with the official seal of the bidder and attached to the bid document.

② From January 1, 2020 to present, overseas bidders have no bad performance records or serious quality problems in China, otherwise their bids will also be rejected.

Supporting materials: Bidders must provide a letter of commitment.

③ Bidders are not listed in the blacklist database of suppliers of Sinochem. (the list is subject to the deadline of bidding);

5) The bidder must be the manufacturer.

Supporting materials (bound in the bidding document): the bidder must provide the manufacturer"s qualification statement stamped with the bidder"s official seal.

6) Requirements for financial and operating conditions: the bidder is not in the state of bankruptcy, asset freezing, property being taken over, being ordered to suspend business, or being disqualified for bidding, and has been in good financial condition since 2018, and has sufficient assets and capacity to effectively perform the contract;

Supporting materials: the bidder shall provide a letter of commitment, which shall be stamped with the official seal of the bidder and bound in the bidding documents.

7) Performance requirements：

From January 1, 2018 to the present (subject to contract signing time), The Bidder has complete supply performance of refractory materials for SAR waste acid regeneration furnace of the new acrylonitrile complex in China.

Supporting materials: the bidder shall provide the contract and technical agreement with corresponding performance, which shall at least include the project name, user name, plant scale, supplied refractory material variety, specification and parameters, supply quantity, contract signing date and signing and stamping page, user contact person and telephone number, etc.

8)The Joint Venture bidding shall not be accepted in this bidding project.

The bidder and the bid evaluation committee reserve the right to review the originals of qualification certificates, performance and relevant information. If they are found to be falsified, the bid will be rejected.

4. Interested bidders can register and download the bidding documents (electronic version) online from 8:30 AM to 17:00 PM (Beijing time) every day from Sep., 18th, 2023 to Sep., 25th, 2023 (except holidays). The fee for platform use and technical support is RMB 2000 or USD 300. Bidders that did not register and download the bidding documents from Sinochem Commerce Co., Ltd. shall be rejected.

Address for bidding documents: Sinochem Commerce Electronic Bidding Platform Website

Contact person for bidding documents: Sinochem Commerce Electronic Bidding Platform

Website

Tel: 86+10-***

Online registration and downloading bidding documents: Login to Sinochem Commerce Electronic Bidding Platform Website (e.sinochemitc.com), potential bidders need to register online first (free of charge), pay the fee for platform use and technical support through online, after successful payment, you can download the bidding documents (electronic version) and VAT electronic ordinary invoice.

After obtaining the bidding documents, the bidder shall log in the SCM platform of Sinochem Energy Procurement supply Chain (http***m.com) for registration (free of charge), upload the bidding documents to obtain vouchers (invoices), and click the bidding documents to download on the SCM platform after the review. The technical support phone of SCM platform***turn to 2.

Special Note:

① The bid documents (paper documents and electronic documents) shall be sealed and delivered to the bid opening address before the bid deadline in accordance with the requirements of the bidding documents, otherwise they will not be accepted.

② Bidders are required to enter the quotation for this project in the SCM system and upload the electronic bid documents to the SCM platform of Sinochem Energy Procurement Supply Chain (http***m.com) before the bid deadline.

③ When the electronic document is inconsistent with the paper document, the paper document shall prevail.

For Project Inquiry:

Contact address for the Project: 25th Floor, Building B, Ping’an Fortune Center, No. 24 Lize Road, Fengtai District, Beijing.China. 100073,P. R. China.

Contact person: Ms. Chen Xiaomei, Mr. Qiu Shaowei, Mr. Chang Gang, Mr. Chen Zhichao

Tel: +86 ***524, +86 ***906

E -Mail:qiushaowei@sinochem.com, chenxiaomei02@sinochem.com

5. All Bids must be delivered to the following address before 9:30 a.m., Oct.,9th, 2023(Beijing time). Time for bid opening ceremony is 9:30 a.m., Oct., 9th, 2023 (Beijing time).Due to the need of epidemic prevention and control, representatives of bidders who cannot participate in the bid opening ceremony on site will be invited to attend the online bid opening ceremony at that time. The online bid opening ceremony will be conducted in the form of Tencent conference, please download Tencent conference software (free of charge) in advance. The conference ID and conference password will be informed to the bidders by email 3 days before the bid opening.

Address for bid submission and bid opening: Meeting Room, 23rd Floor, Building B, Ping’an Fortune Center, No. 24 Lize Road, Fengtai District, Beijing.China.

Submission method of bid documents: Bidders shall deliver or mail the bid documents, and both methods shall guarantee the bid documents to reach the submission location specified in the bidding documents before the deadline for submission of bid documents. Mailing address: Meeting Room, 23rd Floor, Building B, Ping’an Fortune Center, No. 24 Lize Road, Fengtai District, Beijing China. Ms. Chen Xiaomei, +86 ***524.

6. Foreign currency account number for paying the fee for platform use and technical support.

Account name: Sinochem Commerce Co., Ltd

Bank of China: Bank of China Limited Beijing Fengtai Sub-branch

U.S. dollar account number: ***5282

Euro account number: ***7855

SWIFT Code：BKCH CN BJ 110

Bidders are requested to indicate in the remittance envelope, in order, when remitting the fee for platform use and technical support: ① the last four digits of the tender number, i.e.: "X475"; ② the fee for platform use and technical support; ③ the name of the bidder.